Dealing with a Unexpected Hot Water System Shutdown: Key Steps
Dealing with a Unexpected Hot Water System Shutdown: Key Steps
Blog Article
Right here in the next paragraph you'll find some helpful insight involving What Would Cause My Electric Water Heater to Stop Working?.
Several modern-day houses utilize an electrical hot water heater for their heating unit, due to its ease as well as ease of use. Nevertheless, just like any other electric appliances, troubles may develop with its usage, suddenly. It can be actually discouraging to wake up to a chilly shower as opposed to a hot one or having your bath with water that isn't warm enough or even as well warm. Whatever the case may be, water heater issues can be fairly nerve-racking. Thankfully, we have actually made a listing of feasible remedies to your hot water heater concerns. There are a variety of elements that can trigger most of these troubles, it could be a problem with the power supply, the electrical burner, or the thermostat. Prior to doing anything, guarantee you turn off the major power supply for safety. Whatever the problem is, getting it repaired should not posture way too much of a problem if you follow these actions:
Call An Expert:
If after replacing all damaged parts as well as resetting your temperature level, the water heater still isn't working, you might need to contact a specialist plumber for a professional viewpoint. The problem with your heating system could be that the hot and cold faucets have been switched over or it may be undersized for the amount of warm water needed in your home. Whatever the instance may be, an expert plumber would certainly aid resolve the issue.
Examine Your Power Supply:
As standard as this may seem, it is extremely needed. Without ample power, your hot water heater will not function. So the first thing to do when your water all of a sudden stops working is to verify that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the issue, merely turn it off and on once more. Change any type of busted or damaged fuse. Check the home appliance with power after these changes to see if it's currently working.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm enough, you might need to check the temperature level setups on your upper thermostat. Ensure the circuit breaker is switched off prior to doing anything. Open up the access panel and also press the red button for temperature level reset over the thermostat. This must assist warm the water. Transform the circuit breaker back on and also examine if the problem has been resolved.
Inspect the Heating Element in the Water Heater:
If it's not a power problem, after that try having a look at your heating element if it is still working. Examine each of your heating elements to ensure the trouble isn't with any one of them. If any of them is defective, replace that component and afterwards inspect whether the hot water is back on.
Conclusion
Water heater issues are not constantly significant. Much of them result from small concerns like a blown fuse or damaged burner. Changing the faulty parts ought to suffice. Nonetheless, if you are still unable to resolve the problem, give a call to your nearby plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I hope you liked our post on How to Troubleshoot and Repair an Electric Water Heater. Thanks so much for spending some time to browse our posting. Make sure you set aside a second to distribute this blog post if you enjoyed it. Many thanks for your time invested reading it.
Ready to assist, call now! Report this page